No announcement yet.

auto off spots


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • auto off spots

    have come to the final design, of the auto off spot. it now works on first ball only (an early design was active on all cycles causing problems when table jam on spoting, causing os switch to close) runs with 3 wires from front of mc to back box only, waits for the table to come up before reversing sweep ,for protection of mc. and there is no changing of parts to the mc ie, longer bolts etc. and no need to touch os lever adj etc, on one of my first designs i have been running counters on them one bad mc after 9 months saved me 676 t/c,s also chained a counter over 4 lanes the other month and after 2 weeks on those 4 lanes over 200 calls saved, this feature helps a lot in our 28 lane 82-70 centre as we are a double end house and to go from lane 1 to 28 is a 500 foot walk...(just to reverse a sweep### not any more ###), also not far of bringing out my first design of the 7/10, x clcye , gutter cycle, gizmo at a tad of the price of an omega tec expander board, or mp , xop chassis..

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

Prolane damage

Can this be repaired?

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...