Announcement

Collapse
No announcement yet.

Sweep contactor chatter..0-66` only

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sweep contactor chatter..0-66` only

    Definetly in the chassis,but it only buzzes from 0-66' [img]/content/btubb/images/%%GRAEMLIN_URL%%/mad.gif[/img] ....the rest of the sweep operation is quiet & machine runs fine.

    ideas?

    THANX !
    I never had a "10" ;..but ,one night after closing,..I did five " 2's" !

  • #2
    Re: Sweep contactor chatter..0-66` only

    Originally posted by Pindecked:
    Definetly in the chassis,but it only buzzes from 0-66' [img]/content/btubb/images/%%GRAEMLIN_URL%%/mad.gif[/img] ....the rest of the sweep operation is quiet & machine runs fine.

    ideas?

    THANX !
    <font size="2" face="Verdana, Helvetica, sans-serif">Do all of the C2A pins look okay on the Chassis?
    "Where are we going, and why are we in a hand basket?"

    --Kat

    Comment


    • #3
      Re: Sweep contactor chatter..0-66` only

      Annoyance is gone..Just replaced the contacts.
      I never had a "10" ;..but ,one night after closing,..I did five " 2's" !

      Comment


      • #4
        Re: Sweep contactor chatter..0-66` only

        same problem here. Turned out to be the lane a card in the LIU. worth a look. Swop the boards around and see if it happens to another lane! note - will be 8 lanes above, or below the original lane!
        Bring me the freshest "Mean Green" known to man! Juice on!

        Comment


        • #5
          Re: Sweep contactor chatter..0-66` only

          A centre in Oz had same problem as Alistair. Apparently it was only happening when a Omega-Tek or XOP Board was used, was happy with the 5 Board set-up. For memory it was something about Lane A boards being used for AMF mach., but were actually for Brunswick. Something about different diodes??.
          Will try and find out more details.
          Dale Plummer

          Comment


          • #6
            Re: Sweep contactor chatter..0-66` only

            Lane C boards are for Brunswick machines...aren't they?
            TSM & TSM Training Development
            Main Event Entertainment
            480-620-6758 for help or information

            Comment

            Topic Starter RibbonScript

            Collapse

            Adsense Classic 2

            Collapse
            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
             

            Black Consoles

            I got tired of the black consoles braking and they look bad.so I made my own....
             

            Deck knocking pins over on new racks (Need help ASAP)

            I am still very new to working on a2s first off.

            We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
             

            Express Model B 40 lanemachine

            Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
             

            82-70 Distributor belt pulling to the side.

            I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
             

            82-90 XLi Pin Elevator

            I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
            I'm...
            Working...
            X