Announcement

Collapse
No announcement yet.

mp chassis

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mp chassis

    every now and then chassis loses memory about 2 times a week, hit program zero sometimes works ,have to unplug power then zero and works ,changed a transformer seemed hot, didnt happen for a month after that , figured it was fixed,then last night it happened again, any help would be appreciated

  • #2
    Re: mp chassis

    Swap boards with another chassis......see if the problem is the board or the chassis.

    JK

    Comment


    • #3
      Re: mp chassis

      What about T3...it supplies power to the MP board.
      "Where are we going, and why are we in a hand basket?"

      --Kat

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
       

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
       

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...
       

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
       

      Prolane damage

      Can this be repaired?
       

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
      Working...
      X