No announcement yet.



Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts


    Recently I got a new upper ball lift link from Vantage 000-024-720. As always I remove the brass bushings and replace them with Enviro Bushings. Upon removing the smaller ones 900-110-121 I found that the hole in the link was to large for this bushing and the hole in the casting was about the size of the larger one. After placing a call to Vantage, it seems for production purposes and to save a few cents they now are drilling all the holes the same size OD, but the ID is the proper size. You can only get these bushings from Vantage. I'd assume that the lower is the same way too. Anything to give us something else to worry about. Oh well, back to ordering the original from you know who.

    The doctor makes house calls.
    The doctor makes house calls.

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...