Announcement

Collapse
No announcement yet.

RESPOT HOOK & BUSHING ASS'Y

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RESPOT HOOK & BUSHING ASS'Y

    A few of our machines have a respot solenoid and respot hook- unfortunately, this style front end is not covered in our parts manual and I was wondering if anybody had a copy of the parts page with the 82/70 front end with the respot solenoid and hook with parts illustrations and part #'S? Thanks.

  • #2
    Re: RESPOT HOOK & BUSHING ASS'Y

    TABLEJAM,
    I have a manual with the page you are looking for . My scanner is not working, so I would have to fax or snail mail to you.
    Mark
    There is light at the end of the tunnel - just be sure it is not a train.

    Comment


    • #3
      Re: RESPOT HOOK & BUSHING ASS'Y

      Comment


      • #4
        Re: RESPOT HOOK & BUSHING ASS'Y

        Comment


        • #5
          Re: RESPOT HOOK & BUSHING ASS'Y

          Comment


          • #6
            Re: RESPOT HOOK & BUSHING ASS'Y

            I'm converting my 2 solenoid spot/respot assy’s to single solenoid assy’s. You can get the complete assy (070-006-499) from JCP for $275 or piece one together for about $200.

            Comment

            Topic Starter RibbonScript

            Collapse

            Adsense Classic 2

            Collapse
            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
             

            Black Consoles

            I got tired of the black consoles braking and they look bad.so I made my own....
             

            Deck knocking pins over on new racks (Need help ASAP)

            I am still very new to working on a2s first off.

            We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
             

            Express Model B 40 lanemachine

            Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
             

            82-70 Distributor belt pulling to the side.

            I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
             

            82-90 XLi Pin Elevator

            I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
            I'm...
            Working...
            X