Announcement

Collapse
No announcement yet.

Mp chassis plus

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mp chassis plus

    i have 3 questions about it

    * can i find a electrical shedule of the chassis ?
    * The sweep is not responding, he only makes a lot of noise...when i switched the chassis..the sweep is working...any help ?
    *can i find a second hand mp chassis ?

    thx in advance
    Don J

  • #2
    Re: Mp chassis plus

    Check the pins and sockets.

    Check all circuit breakers.

    JK

    Comment


    • #3
      Re: Mp chassis plus

      Sounds like bad pin(s) in the C1 or possibly a bad contactor. I can get you an MP chassis. email me at : wb8yjf@earthlink.net
      Good luck!
      Jon [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img]
      I've had enough of hope & chains.

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
      Working...
      X