Changed chassis, stator, several pins in C1 plug, motor start capacitors, checked adj's. Still coasting. Will switching table and sweep cables tell me anything? All I can think of is gearbox now. any suggs?
Announcement
Collapse
No announcement yet.
Coasting sweep motor
Collapse
Adsense Classic 1
Collapse
X
-
Re: Coasting sweep motor
All I can think of now is your gearbox [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img] [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]
Is it your table or your sweep motor?
Is the motor stopping good first but will coast after that or is it coasting all the way(no break at all).
MartinSo it goes.
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
Rake sweeping out of time, and pin launching onto lane.
I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
Strange sweep problem
I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
GSX Distributor shaft bearings
Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?
2. ANY of these bearings with the black support mount...
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?
2. ANY of these bearings with the black support mount...
The Legacy of the A2
I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
Table turning on short stroke.
Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
Another pivot bearing broke.
One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Comment