Announcement

Collapse
No announcement yet.

Another Jerry Riggin

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another Jerry Riggin

    Queenie

    When you mounted push button cycles near yur Russell Stoll Plug, what were the wire #s you spliced into to tie to the push button cycle?

    Thanks Wang

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Black Consoles

I got tired of the black consoles braking and they look bad.so I made my own....
 

Deck knocking pins over on new racks (Need help ASAP)

I am still very new to working on a2s first off.

We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
 

Express Model B 40 lanemachine

Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
 

82-70 Distributor belt pulling to the side.

I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
 

82-90 XLi Pin Elevator

I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
I'm...
Working...
X