Announcement

Collapse
No announcement yet.

New combo motor capacitors

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New combo motor capacitors

    I just completed changing out all our capacitors.

    The new caps do not have the proper threaded screw hole.

    The screw adaptor on the new caps is not a good fit.

    If you try to utilize the push on connector the wire length on some connectors is not long enough.

    I rewired all the caps wiring that needed it so I could change one in an emergency quickly.

    I used yellow #12 female connectors and twisted the wires inside before crimping.

    You could do a pair of lanes at a time and save some of your old capacitors for spares on lanes not converted.

    Jerry

  • #2
    Re: New combo motor capacitors

    King, who makes these new capicitors? Can you post a pic?

    Robby

    Comment


    • #3
      Re: New combo motor capacitors

      They are what you get when you order caps.

      Just imagine a male spade out of the end of a cap instead of a screw hole.

      Comment


      • #4
        Re: New combo motor capacitors

        Why do you need to change all your caps? Just wondering.

        Nice pics king. I am going to try and post one this weekend of a really odd looking call we had.

        And I knew what the problems was instantly! Belive it or not. [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img] [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

        Comment


        • #5
          Re: New combo motor capacitors

          I changed them all due to 30 years of use.

          They all now have the push on terminals.

          JK

          Comment


          • #6
            Re: New combo motor capacitors

            They seem to work OK but I don't much care for them. Just getting old and set in my ways I guess.

            Comment

            Topic Starter RibbonScript

            Collapse

            Adsense Classic 2

            Collapse
            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
             

            Black Consoles

            I got tired of the black consoles braking and they look bad.so I made my own....
             

            Deck knocking pins over on new racks (Need help ASAP)

            I am still very new to working on a2s first off.

            We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
             

            Express Model B 40 lanemachine

            Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
             

            82-70 Distributor belt pulling to the side.

            I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
             

            82-90 XLi Pin Elevator

            I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
            I'm...
            Working...
            X