No announcement yet.

Old style ball lift parts


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Old style ball lift parts

    Our ball lifts still have the old style shafts/bearings/retainers.... Where can we get replacement parts for these? If you dont know what I mean, I'm talking about the old style with the shafts that dont have threads at the end, they just have a retaining ring.... The bearings fit completely inside the "fork" and have a retaining collar on the inside that tightens with a set screw.... Vantage had the shafts listed but not the lock/retaining collar or bearings..... Any help with who sells these or part #s?

  • #2
    Re: Old style ball lift parts

    I think Murrey has those parts. You could also try JCP. You might also consider upgrading to the style as your old ones fail. You can buy the new shafts and bearings as a kit for a reasonable price.
    Give me a hammer and some duct tape and I can fix it!


    • #3
      Re: Old style ball lift parts

      I still use the shafts with the retainers on them. I think that I have been getting them from JCP. I use them to save space and I just like them better and they are aeasier fro me to work with.

      I saw the topic on this post and thought you might be talking about the spring type ball lift clutches. Where I work that is what they were using when I started a few years ago. Now those are vintage! [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img] [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img]


      • #4
        Re: Old style ball lift parts

        when you said old elevators i was thinking of the vertical lifs that i have worked on for 15 years, they have 2 types one with roll pin and the other with lock collar/grub screw from memory there ordered from amf as a 82/30 part shaft size etc should be the same...


        • #5
          Re: Old style ball lift parts



          • #6
            Re: Old style ball lift parts

            Hey Adam

            Give me a call at 216 308-0555 and I will give you a sweet deal on conversion kits.



            Topic Starter RibbonScript


            Adsense Classic 2

            widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

            Well this is a first.

            We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

            Ball return wheel guide roller removal.

            Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

            Even old mechanics find something new.

            All my years working on these things I never had this happen…… until last week. ...

            82-90XL Frontend Gearbox Parts - Rebuild Woes

            We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

            Prolane damage

            Can this be repaired?

            LED Ball Lights

            Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...