Announcement

Collapse
No announcement yet.

p.b.l. tip

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TheLegend
    replied
    Re: p.b.l. tip

    Originally posted by pinboy68:
    On the kickers the start pad gets the balls up the lift past the point where they would fall back down.
    <font size="2" face="Verdana, Helvetica, sans-serif">The lift assembly also sits in a different position.

    But I have had balls yoyo on a kicker lift.

    Leave a comment:


  • Clutch Plate
    replied
    Re: p.b.l. tip

    On the kickers the start pad gets the balls up the lift past the point where they would fall back down.

    Leave a comment:


  • Dutch
    replied
    Re: p.b.l. tip

    That's the same thing we used to do before getting the thick covers. I'd super glue 3-5 pac-man washers together &amp; slip them in.

    Humpy's come (or at least, used to) with an adjustable lower link bracket that serves the same purpose.

    I've never compared the distance between the lift &amp; the uprails on KKR's &amp; PBL's. Anybody know if this is why you don't get yo-yo's on kicker lifts?

    Leave a comment:


  • Clutch Plate
    started a topic p.b.l. tip

    p.b.l. tip

    Are you running P.B.L's and having a problem with balls starting up lift rods and falling back down?(BAM..BAM..BAM) If everything is adjusted correctly, the cause for this is the distance between lift rods and ball lift belt near the bottom of rails is too great. You can decrease this distance by placing a "U" shaped spacer(1/8 to 3/16 thick) between bracket which rails are bolted to and angle bracket which is mounted to each kickback. Loosen 3/8" bolts (kind of a bitch since they are behind rails) wedge flathead screwdriver between brackets and slide one spacer in each side. I've never had to use thick uprails after this mod.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X