Announcement

Collapse
No announcement yet.

Dutch's _8270_5_board_chassis.doc

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dutch's _8270_5_board_chassis.doc

    Dutch\'s 82/70 5 Board Chassis Doc.
    If at first you don't succeed, try, try, again. Then quit. There's no use being a damn fool about it." -W.C.Fields

  • #2
    Re: Dutch's _8270_5_board_chassis.doc

    Thanks, Felix!

    Comment


    • #3
      Re: Dutch's _8270_5_board_chassis.doc

      hey dutch, i will check my notes and give you some additions

      will email you soon
      i don't need mods, i am a bloody genius

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
      Working...
      X