If you are seeing this you are not logged in to Bowl-Tech. Remove this notice by Registering or Logging in
By your continued use of this site you agree to the following.
You are over the age of 18 and have had supervised training in safety and operations of the equipment you work on.
Bowl-Tech does not warrant or guarantee the accuracy of information found on this site. Bowl-Tech, its officers, site Admins or Moderators will not be responsible in the case of losses financial or otherwise as a result of use of ANY information on this site.
Bowl-Tech is not a substitute for proper training on bowling equipment maintenance. You will seek personal training from trained professionals within your center with regards to safety & maintenance practices while working on bowling equipment.
Posts on the site are made by registered members and each member is responsible for the content and accuracy of their posts.
If you can not agree to any of these terms of use above or are not at least 18 years of age you are asked NOT to visit Bowl-Tech or utilize its content. To visit the Bowl-Tech Terms of Service and Rules CLICK HERE
Please join our community. It is easy and gives you additional access to forums and other tools. CLICK HERE to join
Have 82/70 chassis with plugin stepper relay, not sure what model this is called. Omega-Tek made a single board conversion for this chassis but, not sure if it is still available. My questions are,
1.does Omega-Tek still make the conversion kit?
2.If the kit is not available can a 5 board chassis be substituted, or would there need to be some wiring mods made to accomodate the 5 board chassis? Any help and/or suggestions would be appreciated. Thanx
Thanx for the quick reply 82/70 king, do you know where I can purchase one of the "B" chassis conversion kits? And/or do you know what wiring mods would be needed to install the SS Chassis?
[QUOTE]Originally posted by boheemee:
[QB]Thanx for the quick reply 82/70 king, do you know where I can purchase one of the "B" chassis conversion kits? And/or do you know what wiring mods would be needed to install the SS Chassis?
Only wiring mods will be to replace the masking unit plug. SS chassis has a round plug. Everything else is the same. I spliced in the new plug leaving the old one there too. That way either chassis will work. Not a hard thing to do by any means.
If memory serves me right, Omega Tek is no longer selling the conversion for the B chassis directly. You can contact Jim Wentz at Hilltop Bowling in New Carlisle, Ohio at (937) 882-6605. I believe he is still either selling them on does the conversion for you. The demand was not up to snuff for Omega Tek to merit continuing the conversion. King, does that sound right to you? [img]/content/btubb/images/%%GRAEMLIN_URL%%/confused.gif[/img]
Jon [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img]
Originally posted by wb8yjf: If memory serves me right, Omega Tek is no longer selling the conversion for the B chassis directly. You can contact Jim Wentz at Hilltop Bowling in New Carlisle, Ohio at (937) 882-6605. I believe he is still either selling them on does the conversion for you. The demand was not up to snuff for Omega Tek to merit continuing the conversion. King, does that sound right to you? [img]/content/btubb/images/%%GRAEMLIN_URL%%/confused.gif[/img]
Jon [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img]
Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
I'm...
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment