Sweep weldment part #

[pat]

Hello all. I am at my home now and the only parts book that I have is very old and the part number for the sweep welment is out of date.

We have 8270 "B" machine and we have a sweep welment that has been welded and now it is pushing on the table motor. I am thinking that it is time to stop replacing table drive shafts (none on my watch yet, BUT [img]/content/btubb/images/%%GRAEMLIN_URL%%/eek.gif[/img] ) and getting this sweep to have good stops and run smooth. I need to replace the weldment assy for the sweep. I hope that it is still called a sweep weldment.

Any help would be appreciated.

[Steve Stafford (JBEES)]

Re: Sweep weldment part #

I show it as a sweep rocker arm assembly. Is that what you're after?

070-003-132

[Kat]

Re: Sweep weldment part #

Original Rocket has been replaced with a new style. They have done away with the pillow block setup.

New part number:

090-004-010

You will also need to order (if replacing original)
Qty 2 each of:
090-005-015 Insert for new style rocker
090-004-007 Plate to mount rocker

[triac]

Re: Sweep weldment part #

Pat, If you want a newer parts book, go to this web site to download the parts catalog.
<a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank"><a href="http://www.amfproducts.com/techs/manuals.asp" target="_blank">http://www.amfproducts.com/techs/manuals.asp</a></a></a></a></a></a></a></a></a>

If you don’t know how to download a PDF file, you need to:

Navigate down to 82-70 Pinspotter Parts Catalog (1.9MB)
Right click on this link…82-70 Pinspotter Parts Catalog (1.9MB)
Then Select (Save Target AS…)
It will then download the catalog to your computer wherever you select its destination.

Triac

[pat]

Re: Sweep weldment part #

Bowltech does it again. Triac that is exactally what I need! Thanks all. Now I can access a new catalog any time I have access to a computer! [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img] [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

[old-school-mechanic]

Re: Sweep weldment part #

I'm not quite sure what you want. But I might have what your looking for if it's what I think your needing. Over the years alot of area houses have gone under. Fire, roof falls in,or other reasons. In some cases I have purchased the machines. I have parts that few houses keep on hand.

[old-school-mechanic]

Re: Sweep weldment part #

I do have a couple of these. But they only cost 150.00, I'd let this go for less. But after shipping wouldnt be alot of difference.

[the old dirt man]

Re: Sweep weldment part #

sweep rocker arm kit assy.
610 700 156- $162.64----from AMF
nothing extra needs to be ordered! :p
that is until the end brackets break! [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

[Steve Stafford (JBEES)]

Re: Sweep weldment part #

Originally posted by Kat:
Original Rocket has been replaced with a new style. They have done away with the pillow block setup.

<font size="2" face="Verdana, Helvetica, sans-serif">Kat...I now remember something like that being mentioned during school...sorry I didn't remember...

[old-school-mechanic]

Re: Sweep weldment part #

[QUOTE]Originally posted by the old dirt man:
[QB]sweep rocker arm kit assy.
610 700 156- $162.64----from AMF
nothing extra needs to be ordered! :p
that is until the end brackets break!

I have one I'll sell for 100.00, I never had one break. I must be lucky, In 25 years I think I've replaced 8 pillow blocks.