Announcement

Collapse
No announcement yet.

via powerlifts

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • via powerlifts

    Has anyone had the new via powerlifts before? I'm getting ready to take over a new center and they have these ball lifts. I have worked on every other ball lift on the planet but have yet to come across these. just wanted to find out if there is any drawbacks from these lifts
    They say that the **** rolls down hill but the smell always starts at the top.

  • #2
    Re: via powerlifts

    I think that there is a GFL manual now available.
    Pinspotters do not break down when they are not running!

    Comment


    • #3
      Re: via powerlifts

      via powerlifts are AMF c-90 with vantage style S rails. dont know about the circuit board or motor, but cant be much different

      Comment


      • #4
        Re: via powerlifts

        I think that the VIA and AMF C90 powerlifts are the same style, but still very different. AMF actually buys the S rails ( I call them C tracks ) from VIA, so they are identical. The VIA/AMF C tracks, IMO, are probably the best available, they have lasted at least 10 years on average for me. All the electronics are Chinese, I think, so that area of the powerlift is very different and may pose a problem when needing spare parts. VIA also uses a different motor than AMF. I have never seen the VIA powerlift in action for any period of time though, so I do not know it's durability or longevity.

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Approach Wear - DBA IQ/Anvilane

        Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
         

        Rake sweeping out of time, and pin launching onto lane.

        I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
         

        Strange sweep problem

        I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
         

        GSX Distributor shaft bearings

        Two part topic:
        1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

        2. ANY of these bearings with the black support mount...
         

        The Legacy of the A2

        I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
         

        Table turning on short stroke.

        Hello dear Bowltech members.
        First let me say thank you for your time. am plagued by a big issue for three weeks now.
        our technician is working full time on another...
        Working...
        X