Announcement

Collapse
No announcement yet.

82/70 sweep problem

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 82/70 sweep problem

    Hi to all,

    Last days i have a problem with machine 8. When a ball pass the trigger or I push the cycle button on the chassis...the sweep is running slowly to his first stop point. Somethimes it takes 5 seconds to start the sweep cyclus when a ball passes the trigger and the sweep stops very freqently before he reach the first step.

    When I activate the S1 switch on the machine, the sweep runs like it must be.

    Where starts my adventure ?

  • #2
    Re: 82/70 sweep problem

    Mocht er iemand nederlands spreken, het zou een goeie hulp zijn in de toekomst.

    greetz to all

    Comment


    • #3
      Re: 82/70 sweep problem

      sounds like possible SB (middle sweep cam) lever needs to be turned out or changed. Im assuming you've already changed chassis and motors with a known good one.

      Comment


      • #4
        Re: 82/70 sweep problem

        could also be a "sweep run" or "reverse switch" going bad.

        Comment


        • #5
          Re: 82/70 sweep problem

          Sounds like instructomat is pulling in and out. Try jumping 5 and 6 in the amc box but have the managers control switch in the off position. If you have the 5 board chassis you might see the in, lite flicker.

          Comment


          • #6
            Re: 82/70 sweep problem

            It might be a relativity issue. Are you drunk or stoned while observing the speed of the sweep? Mayhap you've accidently tapped into the Matrix, and youre able to slow down time? If this is the case, remember the little boy's advise to Neo ; " There is no spoon." (substitute sweep)
            The impossible often has a kind of integrity to it which the merely improbable lacks.

            Comment


            • #7
              Re: 82/70 sweep problem

              Originally posted by *70*PinMonkey:
              Mayhap you've accidently tapped into the Matrix
              <font size="2" face="Verdana, Helvetica, sans-serif">so what your sayin monkey is he needs anti-matter and plasma injectors to set up a dampning field for his sweep?? hmmm a sweep with nacells on them, fascinating [img]/content/btubb/images/%%GRAEMLIN_URL%%/usflag.jpg[/img]

              Comment


              • #8
                Re: 82/70 sweep problem

                Coors, do you REALLY want to get me started on Trek again?? this sounds like an open invite...lol

                Comment


                • #9
                  Re: 82/70 sweep problem

                  Sounds like the Heizenberg compensator is on the fritz. [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

                  Comment


                  • #10
                    Re: 82/70 sweep problem

                    Sorry, Had to throw that in there.

                    Seriously, Don, Have you changed the chassis?

                    Comment


                    • #11
                      Re: 82/70 sweep problem

                      Originally posted by JimDorsin:
                      Coors, do you REALLY want to get me started on Trek again?? this sounds like an open invite...lol
                      <font size="2" face="Verdana, Helvetica, sans-serif">hailing frequencies open [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]

                      Comment


                      • #12
                        Re: 82/70 sweep problem

                        Number One, I order you to take a number two.
                        The impossible often has a kind of integrity to it which the merely improbable lacks.

                        Comment


                        • #13
                          Re: 82/70 sweep problem

                          Found it,

                          The sweep camber was out of range.....I always try an other chasis before i do something else.

                          greetz to all

                          Comment


                          • #14
                            Re: 82/70 sweep problem

                            thanks for letting us all know what it was!

                            Comment


                            • #15
                              Re: 82/70 sweep problem

                              Originally posted by Coors:
                              hmmm a sweep with nacells on them, fascinating
                              <font size="2" face="Verdana, Helvetica, sans-serif">I'm thinking more along the lines of photon torpedo launchers trained on the foul lines...just waiting for someone to cross them. [img]/content/btubb/images/%%GRAEMLIN_URL%%/laugh.gif[/img]
                              TSM & TSM Training Development
                              Main Event Entertainment
                              480-620-6758 for help or information

                              Comment

                              Topic Starter RibbonScript

                              Collapse

                              Adsense Classic 2

                              Collapse
                              widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
                               

                              Approach Wear - DBA IQ/Anvilane

                              Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
                               

                              Rake sweeping out of time, and pin launching onto lane.

                              I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
                               

                              Strange sweep problem

                              I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
                               

                              GSX Distributor shaft bearings

                              Two part topic:
                              1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

                              2. ANY of these bearings with the black support mount...
                               

                              The Legacy of the A2

                              I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
                               

                              Table turning on short stroke.

                              Hello dear Bowltech members.
                              First let me say thank you for your time. am plagued by a big issue for three weeks now.
                              our technician is working full time on another...
                              Working...
                              X