No announcement yet.

82/70 sweep and table motors


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • 82/70 sweep and table motors

    I am looking for a vendor that can sell new or rebuilt sweep and table motors. They are the old combo motors like matsu****a. I have a bunch of gearboxes for these motors and hate to have to buy the new style amf replacement units.
    Acta non verba.

  • #2
    Re: 82/70 sweep and table motors

    I used to use Quality's Leeson motors. The only drawback was they required a different size carbon brush and you had to pull the motor off to replace them.
    -- Larry


    • #3
      Re: 82/70 sweep and table motors

      Watch for any centers upgrading their 70's to 70XL or XL-i. They only need to send back their machine motors, so all their spares will be available for sale.

      Otherwise, check with Stahl's Seventys. They're real good with Nationals.


      • #4
        Re: 82/70 sweep and table motors



        Topic Starter RibbonScript


        Adsense Classic 2

        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

        Black Consoles

        I got tired of the black consoles braking and they look I made my own....

        Deck knocking pins over on new racks (Need help ASAP)

        I am still very new to working on a2s first off.

        We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...

        Express Model B 40 lanemachine

        Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.

        82-70 Distributor belt pulling to the side.

        I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...

        82-90 XLi Pin Elevator

        I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.