No announcement yet.

Stahl's training classes


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Stahl's training classes

    Hi all,
    As mentioned in a previous post I plan on taking the Stahl's or AMF 82/70 pinspotter training classes. Since my only prior experience with pinspotters was 20 years ago as a pinchaser I've been trying to get a part-time gig at a bowling center to refresh my memory. It appears that isn't going happen due to scheduling conflicts. So, my question is: Are the Stahl's classes suitable for beginners or do they require 6 months experience as with the AMF classes?


  • #2
    Re: Stahl's training classes

    Tommy's class will be a huge help to you, They have very good instructors. You will most likely get paired up with people who have knowledge going into the course. They will help you along in the class. If you do go, let me know if they fixed an error in the wiring diagrams they hand out. I caught it some years back when & went down for a refresher course. I picked up a couple things from the course. And had a real good time.
    Even a old dog can bury a bone


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

    Prolane damage

    Can this be repaired?

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...