Announcement

Collapse
No announcement yet.

lafarge

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lafarge

    Please post the roller bearings for the clutch pinion.

    Do you put a flat roller bearing inside for the thrust washer?

    JK

  • #2
    Re: lafarge

    Jerry, I believe he is developing a way to protect his interest. Dustin may be making a part or trying to manufacture a part which incorporates the roller bearing.

    Mike
    Pinspotters do not break down when they are not running!

    Comment


    • #3
      Re: lafarge

      Jerry, I have seven parts that I will be releasing to various venders this year. You will be the first to know.
      Mike
      Pinspotters do not break down when they are not running!

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
       

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
       

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...
       

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
       

      Prolane damage

      Can this be repaired?
       

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
      Working...
      X