No announcement yet.

"rod" from light ball assy


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • "rod" from light ball assy

    Ok... New problem... I believe that it is the "rod" from the light ball assy that has broken on me, but mine doesn't look anything like any pictures I've seen. Mine is encased in 2 springs, with caps that go on the ends and is longer than what appears to be pictured... Could I be looking at the wrong thing? It is definately the rod that causes the ball paddle to go back and forth.


  • #2
    Re: "rod" from light ball assy

    I've been looking a little more... Is it possible that someone used a rod assy, instead of the spring loaded drive link assy? I think that's what is on all of my other machines, because it's definately not what was on this machine.



    • #3
      Re: "rod" from light ball assy

      If you have PBL's with LBS it should be a solid rod with rod ends. The part number is 070-011-123 for the assembly.



      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...

      Another pivot bearing broke.

      One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...