No announcement yet.

table tourque tube


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • table tourque tube

    not that i need to, and never have, what is the best method of changing if you ever needed to. i've thought about it from timt to time, and just want to get a few ideas just in case it ever bites me in the ass. thanks for any posts. brad k
    Don't mind me, what you read is invisible.

  • #2
    Re: table tourque tube

    Fairly simple, drop your table springs, put table at BDC on wood, disconnect the spot and respot rods, disconnect the clevis, off spot wires, bolts or pins on the table support legs, wrap and old belt (the kind for your pants) or rope around torque tube and frame in the middle (to support the tube), unbolt your pillow blocks on the ends. pull out the tube.

    Think that all, If I missed something sorry, been working a Brunswick house the last week.

    Please.....follow the instructions!!



    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Approach Wear - DBA IQ/Anvilane

    Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...

    Rake sweeping out of time, and pin launching onto lane.

    I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

    Strange sweep problem

    I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

    GSX Distributor shaft bearings

    Two part topic:
    1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

    2. ANY of these bearings with the black support mount...

    The Legacy of the A2

    I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

    Table turning on short stroke.

    Hello dear Bowltech members.
    First let me say thank you for your time. am plagued by a big issue for three weeks now.
    our technician is working full time on another...