Announcement

Collapse
No announcement yet.

Omega Tek Analyzer Board

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Omega Tek Analyzer Board

    Does anyone have one and what does it do?

  • #2
    Re: Omega Tek Analyzer Board

    It works like the old 1 board. It has lights and tells what the machine is using. it will help you trouble shot. You also can get a christmas tree on it for pindication if you have wires, with no masking lights.

    Comment


    • #3
      Re: Omega Tek Analyzer Board

      Question: this works on the 82-30 Omega Tek? If So, where do we get one?
      Indexer2

      Comment


      • #4
        Re: Omega Tek Analyzer Board

        I'm not sure. Call Omega-Tek at 1-419-756-9580.

        Comment


        • #5
          Re: Omega Tek Analyzer Board

          Saw the board advertised on pinsetterparts.com

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Approach Wear - DBA IQ/Anvilane

          Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
           

          Rake sweeping out of time, and pin launching onto lane.

          I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
           

          Strange sweep problem

          I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
           

          GSX Distributor shaft bearings

          Two part topic:
          1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

          2. ANY of these bearings with the black support mount...
           

          The Legacy of the A2

          I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
           

          Table turning on short stroke.

          Hello dear Bowltech members.
          First let me say thank you for your time. am plagued by a big issue for three weeks now.
          our technician is working full time on another...
          Working...
          X