No announcement yet.

AMF Dist belt (Warning this pic is big and make take a while to load)


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • AMF Dist belt (Warning this pic is big and make take a while to load)

    Looks good, but IMHO its a copy of the grey stahls belt they have had out for a few years.


  • #2
    Re: AMF Dist belt (Warning this pic is big and make take a while to load)

    We have those belts at our house for about 1 month they still look new and oil does not bother then at all. they are sticky thuogh if you get a pileup it will put every pin on top of the machine so you will not get the bang bang bang that goes with a pile up so no warning bofore the desk calls to let you know unless you see it in time
    It's so quiet here you can hear a pin drop!


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Ball Returns Shorted Out?

    Ok, I just had one of my company's centers in Florida reach out for help with this issue, and I wasn't able to help them over our chat, so I'm hoping you guys can help shed some...

    Trip rocker arm

    What causes the trip rocker arm to not line up with the trip rod? Carriage tubing is not bent and all eccentrics are brand new.
    I understand I can bend the rocker arm a...

    Lower ball cushion board

    Just wondering if this is the normal way that these boards go over time? Am i missing something?
    Pit curtains are in "reasonable" condition if that means anything...

    Backend motor plug

    What is the name of the power plug and socket on the back-end motor?

    Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....

    82/70 combi motors

    Hi guys, got a few of these Lewus solid state start switches and wondering if we could make use of them on our combi motors. I've seen they aren't recommended for combi motors...

    Deck lowering hook cam follower lever

    I have a machine that has broken the cam follower arm for the deck lowering hook on the 2 to 1 twice in a couple weeks. I've overnighted the part so i can change it tomorrow....