Announcement

Collapse
No announcement yet.

Handheld unit on xli

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Handheld unit on xli

    Hey John, do you know if the hand held
    RJ45 cable is hub to hub or hub to computer? I need a longer cable than the one provided, I can look at it when I get over there but was going to make one up in advance.


    thanks

    Drill
    Drill

    David Bolt
    Champaign, IL
    USBC Silver Coach
    IBPSIA BOD
    IBPSIA Advanced
    Technical Certified
    Pro Shops

  • #2
    Re: Handheld unit on xli

    Don't know for sure, probably won't hurt to try both. I'll call Matt and find out.

    I made the same comment, the reason for the short cable is for CE compliance, the CE folks don't want the cable to get stuck in the machine.

    I voted for an IR version.

    I suggested a extended kit to put the port on the mask frame, could be done in house faily simply.

    Let you know!
    John
    Please.....follow the instructions!!

    John
    804-240-4982

    Comment


    • #3
      Re: Handheld unit on xli

      Matt says it has to be a crossover cable.
      Please.....follow the instructions!!

      John
      804-240-4982

      Comment


      • #4
        Re: Handheld unit on xli

        Thanks, I am thinking of a few different lengths as I can be on top of the machine and cycle,zero the table or sweep and get still see the whole machine.


        thanks John

        Drill
        Drill

        David Bolt
        Champaign, IL
        USBC Silver Coach
        IBPSIA BOD
        IBPSIA Advanced
        Technical Certified
        Pro Shops

        Comment

        Topic Starter RibbonScript

        Collapse

        Adsense Classic 2

        Collapse
        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
         

        Ball Returns Shorted Out?

        Ok, I just had one of my company's centers in Florida reach out for help with this issue, and I wasn't able to help them over our chat, so I'm hoping you guys can help shed some...
         

        Trip rocker arm

        What causes the trip rocker arm to not line up with the trip rod? Carriage tubing is not bent and all eccentrics are brand new.
        I understand I can bend the rocker arm a...
         

        Lower ball cushion board

        Just wondering if this is the normal way that these boards go over time? Am i missing something?
        Pit curtains are in "reasonable" condition if that means anything...
         

        Backend motor plug

        What is the name of the power plug and socket on the back-end motor?

        Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....
         

        82/70 combi motors

        Hi guys, got a few of these Lewus solid state start switches and wondering if we could make use of them on our combi motors. I've seen they aren't recommended for combi motors...
         

        Deck lowering hook cam follower lever

        I have a machine that has broken the cam follower arm for the deck lowering hook on the 2 to 1 twice in a couple weeks. I've overnighted the part so i can change it tomorrow....
        Working...
        X