Announcement

Collapse
No announcement yet.

Chassis Unit

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chassis Unit

    Need help with this problem. 82-70 machine, 1st and 2nd ball lights are on, cycles won't set pins. Has expander bds. have changed them out same problem. Switched machines and problem follows.

    Please Help.

  • #2
    Re: Chassis Unit

    Switch table and sweep relay already?
    The impossible often has a kind of integrity to it which the merely improbable lacks.

    Comment


    • #3
      Re: Chassis Unit

      Sounds like you might have a bad connection in your SP relay socket. It is pretty common for the terminals to get burnt especially #6 and #7.

      You can replace the whole socket or there are some empty terminal pins that you could remove and change out with #6 and #7 with. To remove them just straiten them out and push thru. The ones with wires attached will have to have all of the soldier removed off them first before pushing thru. I would recommend putting the burnt terminals back in the unused spots because it helps hold the relay tight.

      Triac

      Comment


      • #4
        Re: Chassis Unit

        Does the spot solenoid engage at all (you'll hear it buzzing)?

        Have you tried changing the spot relay?

        Should inspect the C1 pins as well.

        Cheers,
        Andrew.

        Comment


        • #5
          Re: Chassis Unit

          ok so ill give it a shot, i had a similar problem and i removed KX relay problem solved.
          hope this helps
          just feeling my way out like a blind man at an orgy.

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Rake sweeping out of time, and pin launching onto lane.

          I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
           

          Strange sweep problem

          I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
           

          GSX Distributor shaft bearings

          Two part topic:
          1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

          2. ANY of these bearings with the black support mount...
           

          The Legacy of the A2

          I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
           

          Table turning on short stroke.

          Hello dear Bowltech members.
          First let me say thank you for your time. am plagued by a big issue for three weeks now.
          our technician is working full time on another...
           

          Another pivot bearing broke.

          One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
          Working...
          X