Announcement

Collapse
No announcement yet.

Paddle Pulley Problem

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    Re: Paddle Pulley Problem

    There is no oil on the belt or pulley, and theres no leaking gearbox. It sounds like what you said Jimmy Jam so i'll give the two solutions a try. Cheers lads I'll let you know what the problem was!

    Leave a comment:


  • Jimmy Jam
    replied
    Re: Paddle Pulley Problem

    With the pit running lift up on the Ball Lift and shake it around. If the belt jumps off you need to look into rebuilding the Lift(assuming its not fastened to the kickbacks).

    Leave a comment:


  • Table Head
    replied
    Re: Paddle Pulley Problem

    Sometimes no matter what they will just come off I had a couple of lanes that would do that. What I did on the tensioner assembly is take a srewdriver and widen the big pully to make the belt fit in the pulley better. I usually bend the pulley until the belt and pulley are level with each other.

    Leave a comment:


  • Kat
    replied
    Re: Paddle Pulley Problem

    Oil on the belt from a leaking BE gearbox or a warped rudder pulley. Make sure the correct belt is being used. (Industry #1380).

    Leave a comment:


  • Jonny Barcoe
    started a topic Paddle Pulley Problem

    Paddle Pulley Problem

    On lanes 1+2 the paddle pulley belt keeps falling off the pulley. the pulleys are both in line and the belt is not worn or stretched. What could be the problem? When this happens the balls will not be kicked back up the pbl causing ball and pin jams in the pit carpet area. Any help will be greatly appreciated!

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X