No announcement yet.

82/90 ?


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • 82/90 ?

    I have a stupid question this place I do service work for has 82-90s with amf accuscore I replaced a pinspotter chassis on lanes 7-8 the machines work fine now but the only thing is they dont come on when you turn the scorers on. but when you turn the on the scorers on 1-2 7-8 comes on as well.Do you have to address the chassis to that pair of lanes once you replace it.Iam newbie to the 90`s but see not too many differences between the 70`S and 90`s except for the pinspotter chassis!!

  • #2
    Re: 82/90 ?

    You sure do Kevin. If you look at the top of the core chassis there is a small panel at the top with 2 screws holding it in. Loosen the panel and you'll find 3 setting knobs in there, labeled on the side as 100's, 10's, and 1's (that's a lot of lane potential there.) The Default setting on a new core is lane 1. All you have to do is make sure the 10's and 100's are on 0 and set the chassis to the first lane number in the pair (in this case 7). So how you like those machines up there bud? Pretty sweet huh? I loved servicing that's just a little....ok a LOT too far away now. Anyway, hope you enjoy your work over there (we did).

    Take it easy

    By the way, tell Sheralyn we (Sr. too) said hi and we miss'em.
    They broke the rack again? Hold on, let me find a part number for "Rack".....


    • #3
      Re: 82/90 ?

      -- Larry


      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

      Prolane damage

      Can this be repaired?

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...