No announcement yet.

No Spot Mp Chassis


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • No Spot Mp Chassis

    Need some help. I have a mp chassis that won't spot pins. We have tryed the mp board all the relays its in the chassis. Also the sweep switch on the side of the chassis was disconnected when I wire it back in I can't get the chassis to program zero, so it won't run.

  • #2
    Re: No Spot Mp Chassis

    Fisrt of all, do you definately have power to the solenoid then if you haven't,
    Could be a bad socket for the relay in the chassis. Try replacing that first, if you don't have voltage.

    Are you sure the solenoid is working ?

    Could be the cams, a cam set up wouldn't hurt.

    If solenoid is engaging, but there is no spotting you probably have a problem with the little black legs under the solenoid being worn.


    • #3
      Re: No Spot Mp Chassis

      check board connections at base of chassis and also spot relay.sounds strange but could you have an instructomat problem.


      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

      Prolane damage

      Can this be repaired?

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...