Announcement

Collapse
No announcement yet.

PINSPOTTER FIXTURES

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PINSPOTTER FIXTURES

    Looking for 8270 and 8290 front end and back end pinspotter fixtures for flipping backends and frontends, and installing the machines on the kickbacks.

  • #2
    Re: PINSPOTTER FIXTURES

    Try Ted, send a PM, I belive he is selling his equipment.
    Please.....follow the instructions!!

    John
    804-240-4982

    Comment


    • #3
      Re: PINSPOTTER FIXTURES

      69,
      I'm selling some of it. The custom fixture stuff I made, I'm keeping. I've sold the original 70/90 stuff.
      I could build you one.
      .
      .
      .
      This post is not an unpaid promotion of my business.

      Comment


      • #4
        Re: PINSPOTTER FIXTURES

        Hi Ted, Any idea what that fixture would be worth?
        I'm sure I can make it fit!!

        Comment


        • #5
          Re: PINSPOTTER FIXTURES

          Scott,

          2 years ago, the fixture, hooks (for flipping backends), frame brackets (for flipping front ends), and the cross-bar (for lifting with a forklift) cost in the range of $5000./US. Pricey, but you have to have it to do installations. I do not know if the shop that built this still has the AMF plans they worked from (I do not believe that they do).

          The fixture was a direct copy of an AMF device and worked very well with 70/90 machines. This also worked as a base for removal of A2 series machines (however you needed to build a wood 'top box' that was fitted to the fixture, to support the deck for removal)

          Al : { )

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Black Consoles

          I got tired of the black consoles braking and they look bad.so I made my own....
           

          Deck knocking pins over on new racks (Need help ASAP)

          I am still very new to working on a2s first off.

          We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...
           

          Express Model B 40 lanemachine

          Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.
           

          82-70 Distributor belt pulling to the side.

          I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...
           

          82-90 XLi Pin Elevator

          I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.
          I'm...
          Working...
          X