No announcement yet.

need a lazy susan part number...


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • need a lazy susan part number...

    I need a need hand dryer motor on 1 of our lazy susan racks. Can anyone tell me what the part number is PLEASE and where i can get it. I don't know a lot about lazy susans. thanks
    The older the part, the STRONGER it is.

  • #2
    Re: need a lazy susan part number...

    057 001 595 Motor-Blower Assembly
    Stahl's or Bob's should have this.
    Someone may have a Grainger or MSC part that fits the bill too.


    • #3
      Re: need a lazy susan part number...

      If you have a Grainger nearby, best bet is to take the part to the store, and let them match it up... there is one direct replacement, several that are comparable, and usually piece parts you can use to rebuild the ones you have. If you are right there looking at it in your hand, it's pretty hard to make a mistake on what one will work.
      <span style="font-style: italic">Educatio est omnium efficacissima forma rebellionis</span>


      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...

      Prolane damage

      Can this be repaired?

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...