No announcement yet.



Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Pinouts

    I have 12 lanes with SS Chassis and Accuscore XL and I want to install MP chassis but I hven't plug for APS on my actual cable between scorer interface and Machine.
    If anybody have the wiring diagram of this cable thank to post it or mail me.
    Thank you.

  • #2
    Re: Pinouts

    The APS cable will go from the scoring computer to the chassis. It might be still available from AMF. There are other wiring mods you might have to make to convert from SS to MP.


    • #3
      Re: Pinouts

      If memorey serves me right,which it doesn't a lot these days,King is need to make a wiring change if you want to get sweep reverse on a 7,10 pic-off/gutter ball. I'm sure AMF wil have a drawing of it if you ask.
      People tell me I'm indecisive, but I just don't know...


      Topic Starter RibbonScript


      Adsense Classic 2

      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...

      Another pivot bearing broke.

      One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...