Announcement

Collapse
No announcement yet.

MP Chassis, Zot? PC Board

Collapse

Adsense Classic 1

Collapse

TOTY

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MP Chassis, Zot? PC Board

    I am not sure who makes this PC board for our MP Chassis. Maybe Zot - Maybe AMF. No logo on the board.

    A little more description of this board:
    On the top left corner of the board there is a RJ 45 plug. I guess for diagnostic equipment.
    on the right side there are LED's

    The LED's show 1st and 2nd ball, foul, strike, and what ever pins are remainig after first ball(while the pins are held in the cells)... It is actually quite nice... We have had them for a long time... But just recently one of our mechanics noticed that it isn't working well with a Qubica XLMP... Sweep reverse isn't working... and no strike cycle.

    I recall from about 10 or so years ago, seeing directions / schematics that came with this PC Board. They had jumper solutions for what you wanted the board to do...

    I was wondering if anyone still has these directions...
    If anyone does have these directions still, could someone please tell me what each of the jumper settings are for?

    I am 99.9 percent sure this is a Zot PC board.

    Just wondering if anyone can help...
    Machines are better than people... I can fix a machine...

  • #2
    Re: MP Chassis, Zot? PC Board

    It is the Creative Tech / Zot board.

    Comment


    • #3
      Re: MP Chassis, Zot? PC Board

      ID PC board from Jon\'s website
      So it goes.

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Ball Returns Shorted Out?

      Ok, I just had one of my company's centers in Florida reach out for help with this issue, and I wasn't able to help them over our chat, so I'm hoping you guys can help shed some...
       

      Trip rocker arm

      What causes the trip rocker arm to not line up with the trip rod? Carriage tubing is not bent and all eccentrics are brand new.
      I understand I can bend the rocker arm a...
       

      Lower ball cushion board

      Just wondering if this is the normal way that these boards go over time? Am i missing something?
      Pit curtains are in "reasonable" condition if that means anything...
       

      Backend motor plug

      What is the name of the power plug and socket on the back-end motor?

      Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....
       

      82/70 combi motors

      Hi guys, got a few of these Lewus solid state start switches and wondering if we could make use of them on our combi motors. I've seen they aren't recommended for combi motors...
       

      Deck lowering hook cam follower lever

      I have a machine that has broken the cam follower arm for the deck lowering hook on the 2 to 1 twice in a couple weeks. I've overnighted the part so i can change it tomorrow....
      Working...
      X