No announcement yet.

Polycord Supplier


Adsense Classic 1



  • Filter
  • Time
  • Show
Clear All
new posts

  • Polycord Supplier

    Most of us use third party suppliers for microswitches, wiring, and maybe some hardware.

    Has anyone tried any other suppliers for polycord belts? Trying to figure out if it's worth exploring or not. I sent out a few emails for quotes this week, but would like input from others.

  • #2

    So we've always gotten in OEM parts - including polycord belting. However I know of other techs I'm friends with that purchase third party brand PC belts over in the states where they work in centres.

    I asked them and they mentioned that Durabelt has good quality smooth PC belts, good price per length to cut to size. BDIexpress was also mentioned.


    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Black Consoles

    I got tired of the black consoles braking and they look I made my own....

    Deck knocking pins over on new racks (Need help ASAP)

    I am still very new to working on a2s first off.

    We started having this issue on tuesday where when the pinsetter goes to spot a new set of pins, a few of them fall...

    Express Model B 40 lanemachine

    Can somebody give an explaniton how pins 2, 3, 6 are supposed to be connected. I had a shortcircuit there for the drive motor connection because of water leakage.

    82-70 Distributor belt pulling to the side.

    I have a distributor that is pulling the belt hard to the left in the nine pin position (and possibly 6 pin), but seems fine in the other spots. As you can see the residue and...

    82-90 XLi Pin Elevator

    I have several Pin Elevators that I believe to be out of round on my XLi's and was curious if anyone has ever run across this before and is so, what you did about it.