Announcement

Collapse
No announcement yet.

Scoring Computer not finding Frame Grabber?

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scoring Computer not finding Frame Grabber?

    Our building was struck by lightning Thursday 23rd wreaking havoc with 2 of our 3 Scoring Computers. The keypads are not functioning for one and the other is not recognizing the Frame Grabber?
    The priority is the Scoring Computer not recognizing the Frame Grabber but help with the keypad issue will be appreciated as well.

    Scoring Computer not recognizing the Frame Grabber:
    Replaced video card, a connection board, & hard drive
    Motherboard is ordered

    Any suggestion?

    Thom
    Why yes, I do have a 3 lb sledge hammer. http://www.bowltech.com/forums/impor...e2012/wink.gif

  • #2
    have you tried to reboot the vector scorer system?

    mark

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
     

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
     

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...
     

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
     

    Prolane damage

    Can this be repaired?
     

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
    Working...
    X