Announcement

Collapse
No announcement yet.

ball accelerator cutout modification...

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BrunsProGrammer
    replied
    Re: ball accelerator cutout modification...

    I did all 30 a couple years ago when we put in ball-walls on all 30. The gutter caps went in so hard, I knew it was going to be a nightmare if we didn't. This is a really good time to go through your rear mounting brackets and weld up cracks... Anyone here want to subcontract reaching between the kickbacks and fishing out pins?

    Leave a comment:


  • PJ
    replied
    Re: ball accelerator cutout modification...

    Project complete 24 lane center. Here is the link to the pictures I posted and the dimensions needed.
    http://www.bowltech.com/forums/showt...729#post260729

    Leave a comment:


  • Adam_Davis
    replied
    Re: ball accelerator cutout modification...

    We have 6 spare accelerator tracks and have been planning to incorporate this mod with them and convert all 50 lanes this way. Time alotted, and limited help, has prevented this endevour unfortunatly.

    Member PJ has embarqued on this project, however, and has achieved great results thus far.

    Leave a comment:


  • Roscoe
    replied
    Re: ball accelerator cutout modification...

    nirvana:
    The dimensions are 5 3/4" wide by 16 3/4" long. Use a hole saw at each corner and cut to them, this will prevent stress cracks from starting at the corners. A square cut will most certainly result in cracking. Start the cut 18" in from the end the ball enters. This is a great project and we owe thanks to Dave Dirrito from Brunswick for coming up with it.
    Roscoe

    Leave a comment:


  • nirvana04
    started a topic ball accelerator cutout modification...

    ball accelerator cutout modification...

    I am wondering what the dimensions are for cutting out a hole for the pins to fall through when they travel into the accelerator pan? I searched on the archives for 20 minutes and couldn't find it. Please tell me if you know.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X