Announcement

Collapse
No announcement yet.

20 amp breakers

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 20 amp breakers

    Hello all,

    not to long ago there was a thread on here in regards to someone installing fuses instead of the overloads....

    I have been giving it alot of thought and i cant stand the new overload set up now because they are so much larger....

    so im thinking of getting some 20 amp breakers and giving that a try to eliminate the overlload in the box...

    What do you all think?

    Mike
    DO A NEAT CLEAN JOB, AND FIX IT RIGHT THE FIRST TIME. THE ONLY WAY TO WORK.

  • #2
    Here is the post you might be referring to:

    http://www.bowltech.com/forums/showthread.php?46408-Electrical-Question&p=449996&viewfull=1#post449996


    A breaker lower than 20A might give your motor better protection. Marky_Mark ended up going with a 10A breaker
    Nick

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse

    Related Topics

    Collapse

     

    A2 1 to 1 Gear Box Cover Replacement Due to Crack

    I am refurbishing two converted A2 machines that I will be installing in my home basement this fall. One of them has a leaking gear box and cracked 1:1 gear box cover. I have...
     

    Streamlane Mask Halo Lights

    With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


    ...
     

    Baddest Tool Chest In Town

    Adios, motor boater!

    ...
     

    Aluminum Repair and Welding

    with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
    http://aluminumrepair.com/...
     

    Setting Table Harness Connections

    Hi, guys.

    We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
     

    check this jam...

    the ball stuck the table up

    ...
    Working...
    X