Announcement

Collapse
No announcement yet.

Accel motors from Grainger

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Accel motors from Grainger

    What are you using for accel motors from Grainger? I have 6K490's as spares and just
    used the last one. They seem a little pricey and would prefer to get away from the
    auto reset motors,

    Marty - Pro Bowl West
    56 Jap A-2's Qubica VDB's
    2 Kustodian Walkers
    http://s1196.photobucket.com/albums/aa408/a2mechanic

  • #2
    Marty: If a belt ever rides off to the inside edge you will thank the fact the mtr had a thermal
    rfm

    Comment


    • #3
      I use 6K631. Have at least 8 on my 20 accelerators.

      Comment


      • #4
        Originally posted by Roscoe View Post
        Marty: If a belt ever rides off to the inside edge you will thank the fact the mtr had a thermal
        Roscoe, I was looking for the manual reset motors and the 6k361 looks like the one I used
        at my last place. They auto reset motors seem to take too long if they need to kick out and
        then forever to come back on.

        Marty - Pro Bowl West
        56 Jap A-2's Qubica VDB's
        2 Kustodian Walkers
        http://s1196.photobucket.com/albums/aa408/a2mechanic

        Comment


        • #5
          6K631 is a good motor. Works well.
          TSM & TSM Training Development
          Main Event Entertainment
          480-620-6758 for help or information

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse

          Related Topics

          Collapse

           

          Deck Lift Gear Damaged

          Starting Issue, Random Cycling of Pinsetter
          Noticed that the Rake Crank Arm had a jerk/stutter on 2nd pass of 4 phase movement. Hand cranked to movement point and felt solid...
           

          Streamlane Mask Halo Lights

          With huge thanks to "Toby" for all his help & expertise...my old masks now have for-real halo lights again.


          ...
           

          Baddest Tool Chest In Town

          Adios, motor boater!

          ...
           

          Aluminum Repair and Welding

          with our broken moving deck i have been asked to figure out if there is a way we can weld it back together in house for very little expense.
          http://aluminumrepair.com/...
           

          Setting Table Harness Connections

          Hi, guys.

          We recently replaced our setting table harness and when the machine's run in diagnostic mode, we get 01, 02, 03, 04 + 09 errors, or when you place pins...
           

          check this jam...

          the ball stuck the table up

          ...
          Working...
          X