Announcement

Collapse
No announcement yet.

Pre-formed urethane pit cushion cover...

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pre-formed urethane pit cushion cover...

    I received a cover...12-252308...some time back from Brunswick only to find that the cover was blotchy looking and had a rough texture to it. I returned it with no problems from Brunswick. Later, I wondered if the issue was a lone fluke or if it could be something that we have discussed here a few times in the past with the cover leaving scuff marks on the bowling balls. So I called Brunswick to see if they had found anything or if there was an issue. I spoke with our very own Dave Dirito about the issue and he is very interested in hearing from anybody that has experienced this issue with this style cover. Not the one that is flat and must be held on with wire tyes...but the one that is already formed to fit around the pit cushion and could stay on without the wire tyes...I personally do not use them on all of the covers as most fit tight and do not need the tyes.

    If you have seen any issues in the past...feel free to post here and Dave will see the post. All information will no doubt be used to try and find any possible patterns.

    Thanks guys...
    TSM & TSM Training Development
    Main Event Entertainment
    480-620-6758 for help or information

  • #2
    Here is a link to one of the threads...

    http://www.bowltech.com/forums/showt...cushion-covers
    TSM & TSM Training Development
    Main Event Entertainment
    480-620-6758 for help or information

    Comment


    • #3
      We recently experienced this exact same issue at a customer of mine in Lawton, Ok. At first I thought "No Way would a pit cushion cover cause this"! I was wrong. The customer had no problem returning these for credit however, they have not yet received replacements.
      "Efficiency is, doing better what is already being done!"
      Pinsetter Technical Services 214-505-7663

      Comment


      • #4
        Lonnie...how long ago was this? I wonder if the warranty department at Brunswick has seen them...Dave, do you know if they got to your location?
        TSM & TSM Training Development
        Main Event Entertainment
        480-620-6758 for help or information

        Comment


        • #5
          Steve, I checked my notes and Lawton worksheets and sorry, but it appears that it was not the Brunswick Urethane that made these marks in Lawton rather the Quality 12-2535. The marks are identical to those in the link you posted.
          We had purchased these about 4 maybe 5 months ago just before they re-opened this center.
          "Efficiency is, doing better what is already being done!"
          Pinsetter Technical Services 214-505-7663

          Comment

          Topic Starter RibbonScript

          Collapse

          Adsense Classic 2

          Collapse
          widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
           

          Well this is a first.

          We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
           

          Ball return wheel guide roller removal.

          Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
           

          Even old mechanics find something new.

          All my years working on these things I never had this happen…… until last week. ...
           

          82-90XL Frontend Gearbox Parts - Rebuild Woes

          We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
           

          Prolane damage

          Can this be repaired?
           

          LED Ball Lights

          Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
          Working...
          X