Announcement

Collapse
No announcement yet.

Special Thanks to several Bowltech gentlement!!!

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Special Thanks to several Bowltech gentlement!!!

    I have my pinsetter up and running after a complete rewiring and changing to ice cube relays, which included replacing the TDM!! A special thanks to Bwhite/Brandon, gave me the wiring schematic that he made up to allow me to replace the old Federal Pacific motor contactor, plus the ice cube relay replacement. Steve Stafford and Lonnie Mitchell were awesome in helping me with the trouble shooting and getting the bugs out!! I had a problem for weeks with the pinsetter wanting to recycle when I turned the machine on. After much wire chasing and talking to everybody I talked to Bowl-Tronics and I changed out a board and the problem was resolved! It appears that when the machine had the electrical problem which lead to the rewire, it blew that board!!! Many thanks to all and these are the people that make this an awesome website, Bruce

  • #2
    I think you got things going good
    YES WE DO HAVE A GRATE BUNCH OF TECHS TO OFFER A HAND WHEN NEEDED

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
     

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
     

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...
     

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
     

    Prolane damage

    Can this be repaired?
     

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
    Working...
    X