Slowing down ball wheels on Bruns As

[Tmc]

Does it make sense to slow down A ball wheels ? If so why ?
Thanks

[Popeye]

What size is your sheave on the ball wheel jack shaft?

[tubby]

Does it make sense to slow down A ball wheels ? If so why ?
Thanks

Less ball damage and no pins in the underground. We did ours here years ago with excellent results!

[Steve Stafford (JBEES)]

Slowing down A's has the same benefits as slowing down A-2's. It is rarer to have undergrounds with A's as the lift rods are longer and the pin has a better chance of falling off before it gets to the top of the lift rods...but slowing them down will allow a little more time just like slowing down an A-2.

[Lonnie_Mitchell]

Slowing down A's has the same benefits as slowing down A-2's. It is rarer to have undergrounds with A's as the lift rods are longer and the pin has a better chance of falling off before it gets to the top of the lift rods...but slowing them down will allow a little more time just like slowing down an A-2.

Ditto!

[MASTERMIKE]

I used to average 14 pin on track ball calls a week and some pins in subway once in awhile before i slowed down my ball wheels on my A's..

I'm lucky i see 7 pin on track ball calls a month now, have not had one pin in subway since i did that i think 8 years ago or more...

Ball damage way down also...

And many more benefits...