Announcement

Collapse
No announcement yet.

Ball Accelerator Electrical Issue

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mitchell Morenz
    replied
    does it do it with both the machines or just one

    Leave a comment:


  • TheDon
    started a topic Ball Accelerator Electrical Issue

    Ball Accelerator Electrical Issue

    When we turn on the pinsetter with the power on to the ball accelerator it pops the breaker. If we turn the switch off that links the power to
    the ball accelerator and the pinsetter we are ok. We can run the ball accelerator without a problem if we do not link the two. (turn the pinsetter on and
    then the ball accelerator on with its own power source.) We can not figure out where the short is to fix our problem. (Rookie mechanics) Any help would be a blessing.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
 

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...
Working...
X