No announcement yet.

vantage 3 piece vib. shaft


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • vantage 3 piece vib. shaft

    anyone see(in person) or use the new vantage 3 piece vib. shaft??? couple of my customers were asking me about them and currious for my own use in my center. looks like a good idea....but we all know by now that everything that looks like a good idea in this business actually turns out not to be....give some feedback guys

    james cecil..jvc bowling supplies

  • #2
    Re: vantage 3 piece vib. shaft

    sorry ...let me rephrase that...what i ment to say is that somethings that look like a good idea in our business can be a backfire. seems like that always happens when you buy one for every pinsetter

    jvc bowling supplies


    • #3
      Re: vantage 3 piece vib. shaft

      Yah,i put one together and put it in,easy enough to put together but..after i put in it,the pit was running sooo slow so...take it back out,switch the ends from one side to the other and pit ran fine.Was told that the ends dont go on any side you like,if you install the ends on wrong side of shaft the pit acts slow.,my pit looked like it was doing the hula before i fixed is well now,no problems.But..why dont they tell you this when you buy it???


      • #4
        Re: vantage 3 piece vib. shaft

        yeah ...sounds like a typical bowling equipment instruction manual....if there is one,is another thing ha ha



        Topic Starter RibbonScript


        Adsense Classic 2

        widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

        Rake sweeping out of time, and pin launching onto lane.

        I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

        Strange sweep problem

        I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

        GSX Distributor shaft bearings

        Two part topic:
        1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

        2. ANY of these bearings with the black support mount...

        The Legacy of the A2

        I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

        Table turning on short stroke.

        Hello dear Bowltech members.
        First let me say thank you for your time. am plagued by a big issue for three weeks now.
        our technician is working full time on another...

        Another pivot bearing broke.

        One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...