Announcement

Collapse
No announcement yet.

shotguns

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • shotguns

    Does anyone know if there is a KIT for rebuilding shotguns? You know like....the spring seat,rollers,bushings,brackets etc.,or is it necessary to keep buying in single parts? To me a kit would be great to see.Just wondering.Thanks!

  • #2
    Re: shotguns

    Sometimes a kit is very useful, but most of the time only a few parts of a kit are needed. The others are filed in a parts drawer. So why not keep the individual parts in the drawer and write the part # in a file(3x5 card) for your referance on a particular part of the machine. This helps me as I hate to pull the service parts book out after my pinchasers use it for awhile. There are pages out of order and pages where there should not be pages ( a big mess).

    Comment


    • #3
      Re: shotguns

      Larry:
      Great idea about the 3x5 cards with part numbers for specific machine assemblies.
      As for the service manual, I solved the problem with mine. I got a spare copy and it stays in my briefcase. It's come in handy a couple of nights when I've gotten a phone call at home because they didn't know where to look in the parts manual for the part number they needed. Pinchasers...gotta luv 'em!

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Approach Wear - DBA IQ/Anvilane

      Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
       

      Rake sweeping out of time, and pin launching onto lane.

      I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
       

      Strange sweep problem

      I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
       

      GSX Distributor shaft bearings

      Two part topic:
      1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

      2. ANY of these bearings with the black support mount...
       

      The Legacy of the A2

      I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
       

      Table turning on short stroke.

      Hello dear Bowltech members.
      First let me say thank you for your time. am plagued by a big issue for three weeks now.
      our technician is working full time on another...
      Working...
      X