Im looking for a copy/replacememt of the A2 Technologies Inventory Control Program by Jim Osdale, I had a major hard drive failure a few months ago and lost everything, after speaking to my supplier in the UK and following his instructions I also trashed my floppy master. I have tried to no avail to contact Jim but I dont seem to have much joy from here. and I refuse to pay £170.00 ($260.00)to replace it. Can anyone help please
Announcement
Collapse
No announcement yet.
Inventory Program ver E.6
Collapse
Adsense Classic 1
Collapse
TOTY
Collapse
X
-
Inventory Program ver E.6
Hi Guys
Im looking for a copy/replacememt of the A2 Technologies Inventory Control Program by Jim Osdale, I had a major hard drive failure a few months ago and lost everything, after speaking to my supplier in the UK and following his instructions I also trashed my floppy master. I have tried to no avail to contact Jim but I dont seem to have much joy from here. and I refuse to pay £170.00 ($260.00)to replace it. Can anyone help pleaseTags: None
-
Tech of the Year 2004,2008
- Jun 1999
- 4204
- A- 2 / 8270
- Qubica / Frameworx
- Phonix-S / Kustodian
- Prolane / HPL / SPL
- 1983
Re: Inventory Program ver E.6
you can find more info at A-2 technologies
new web site. <a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank"><a href="http://www.a-2technologies.com" target="_blank">http://www.a-2technologies.com</a></a></a></a></a></a></a></a></a></a>
Hope this helps
PeanutPeanut
-
Re: Inventory Program ver E.6
I feel your pain! About 1 year ago I purchased the DOS version of this program and installed it on my PC in the shop. About a week later the harddrive crashed. It seems that when you install the disk, it moves a necessary file for the program to run, from the disk to the hardrive. (to prevent piracy I guess) This makes it so you can only run the program on one puter at a time. After calling and calling and calling and sending numerous e-mails I got a phone call from Jim Osdale. I explained to him what had happened and offered to show him receipts. He was extremely helpful and even sent me the windows 95 version on CD-ROM. Apparently he is extremely busy, it took several phone calls and e-mails before I got a response from him. I liked the win95 version better myselfHope it works out for you
Jerridand then he said, "on your death bed, you will receive total consciousness" so I got that going for me...... which is nice!
Comment
-
Members
- Mar 2000
- 784
- A-2,Amf,GSX
- Frameworx
- Kegal phoenix-s and A-22
- Brunswick Pro anville
- 1971
Re: Inventory Program ver E.6
Jim works for american bowling corp.and is on
the road quite a bit doing installation work,if your having a hard time getting him
just keep tring i'm sure he'll get back to you when time permits.
Comment
Topic Starter RibbonScript
Collapse
Adsense Classic 2
Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
Ball Returns Shorted Out?
Ok, I just had one of my company's centers in Florida reach out for help with this issue, and I wasn't able to help them over our chat, so I'm hoping you guys can help shed some...
Trip rocker arm
What causes the trip rocker arm to not line up with the trip rod? Carriage tubing is not bent and all eccentrics are brand new.
I understand I can bend the rocker arm a...
I understand I can bend the rocker arm a...
Lower ball cushion board
Just wondering if this is the normal way that these boards go over time? Am i missing something?
Pit curtains are in "reasonable" condition if that means anything...
Pit curtains are in "reasonable" condition if that means anything...
Backend motor plug
What is the name of the power plug and socket on the back-end motor?
Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....
Some of ours are breaking from impacts from repeated pile-ups and need to be replaced....
82/70 combi motors
Hi guys, got a few of these Lewus solid state start switches and wondering if we could make use of them on our combi motors. I've seen they aren't recommended for combi motors...
Deck lowering hook cam follower lever
I have a machine that has broken the cam follower arm for the deck lowering hook on the 2 to 1 twice in a couple weeks. I've overnighted the part so i can change it tomorrow....
Comment