Announcement

Collapse
No announcement yet.

Second cycle

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Second cycle

    What causes a jetback, (wiretrip, 90% overtravel), to go to second cycle, 90% overtravel after setting new pins. PJ
    I'm going fishing and camping!

  • #2
    Re: Second cycle

    PJ:
    Look for a streched wire link. pt # 12-100350, or a problem with the bearing the link block contacts. Can have other causes, this however is the most common.
    Roscoe
    rfm

    Comment


    • #3
      Re: Second cycle

      PJ:
      Should have added that a streched link problem is recognized by the fact the deck and rake go down and stop at 90.
      If mch goes to second ball at 270 while setting pins, the second ball controller is either bent or broken.
      Hope some of this helps.
      Roscoe
      rfm

      Comment

      Topic Starter RibbonScript

      Collapse

      Adsense Classic 2

      Collapse
      widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
       

      Well this is a first.

      We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
       

      Ball return wheel guide roller removal.

      Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
       

      Even old mechanics find something new.

      All my years working on these things I never had this happen…… until last week. ...
       

      82-90XL Frontend Gearbox Parts - Rebuild Woes

      We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
       

      Prolane damage

      Can this be repaired?
       

      LED Ball Lights

      Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
      Working...
      X