Announcement

Collapse
No announcement yet.

solenoid energizing during cycle

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • billman
    replied
    Re: solenoid energizing during cycle

    Check your rake crank link adjustment,rake hook and the rake arm stops. If the rake is bouncing when it comes forward, it can close the switch momentarily and allow a start signal. What type of triggering do you have? Most have a switch that is used to keep false triggers.


    Happy hunting, billman

    Leave a comment:


  • smurtland
    replied
    Re: solenoid energizing during cycle

    where is the bowl tronics located? if you have them. amf, for some reason likes them behind the rake, causing the solenoid to fire three times every cycle.

    Leave a comment:


  • E W
    started a topic solenoid energizing during cycle

    solenoid energizing during cycle

    I've got a machine that while the rake is down it's getting a signal to the solenoid. I have AMF Accuscore installed w/electronic triggering. There are four micro switches on the machine. Two on the rake lift shaft;#1 goes to the scoring....a take data switch I think? #2 is a hot switch to keep the pinsetter on when the rake is down in the event the machine gets turned off before the cycle is complete. Switch #3 is activated by the rake cam follower. Don't know, but I think this one is like a zero switch for the scores. Switch #4 is the trigger sw inside the elec box. It is for the ball detect and I'm guessing the solenoid lock-out for when the rake is down.I have elominated the everything that plugs into elec box. I have checked and re-checked all the micro switches which all are working properly. With the rake down in gaurd position you can break the detect beam and no signal goes to relay. The machine will sweep, breaking the beam w/nothing happening then come out of 180 breaking the beam again a short time delay then energizes the cycle relay. I know it's probably something small that I'm overlooking but I'm stumpped. Please help me if you can. Thanks in advance.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Well this is a first.

We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
 

Ball return wheel guide roller removal.

Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
 

Even old mechanics find something new.

All my years working on these things I never had this happen…… until last week. ...
 

82-90XL Frontend Gearbox Parts - Rebuild Woes

We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
 

Prolane damage

Can this be repaired?
 

LED Ball Lights

Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
Working...
X