Announcement

Collapse
No announcement yet.

pro anvilane decks

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pro anvilane decks

    anyone else with OOR problems on pro anvilane decks?????

    mine are two years out and still a problem

    full of basecoat right now, but looking for an alternative...

    pins are fine, decks are clean, etc... does anyone know if the engineers for pro anvilane, frame-maybe-worx, and pinball wizard are still alive? please forward address!!!!

  • #2
    Re: pro anvilane decks

    One solution (literally) that we have found is to mix powdered Tide in water, put in a spray bottle, and spray around the pin spots from the 2-3 spots back, making a lattice pattern around the spots.
    The key (and this also works on wood decks) is to make the Tide solution as thick as will go through a spray bottle. When it dries, pins will tend to fall over (or at least tip) instead of slide. Great enhancement for bowler's scores, too.
    The long term cost of inaction is greater than the percieved short term convenience.

    Comment

    Topic Starter RibbonScript

    Collapse

    Adsense Classic 2

    Collapse
    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
     

    Well this is a first.

    We all from time to time have one of those “wow I’ve never seen THAT before” moments. Well today was one of those for me when my night tech texts me to say lane 16 is out...
     

    Ball return wheel guide roller removal.

    Hey guys, i could just use a bit of advice trying to get this part out, first time I've had to do one of these. I got it to move a few turns but its come to a point where it has...
     

    Even old mechanics find something new.

    All my years working on these things I never had this happen…… until last week. ...
     

    82-90XL Frontend Gearbox Parts - Rebuild Woes

    We have 5 of the 088000365 replacement gear kits on the shelf, and I pulled two gearboxes off machines earlier this week, so I thought I'd try my hand at rebuilding them and save...
     

    Prolane damage

    Can this be repaired?
     

    LED Ball Lights

    Made an LED conversion for A2's and Frameworx masks. It can also be modded for the Harmony masks to accept 2 x 5mm led's and/or a 12v supply. Once I'm happy with the performance/design...
    Working...
    X