Announcement

Collapse
No announcement yet.

1st & 2nd ball light tin cups

Collapse

Adsense Classic 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JEFF KUHNLE
    replied
    Re: 1st & 2nd ball light tin cups

    SOUNDS GOOD TO ME.
    I DONT SEE WHY YOU COULDNT USE THEM FOR YOUR LIGHTS.
    GOOD IDEA!!

    JEFF KUHNLE
    TWIN OAKS LANES
    TOLEDO OHIO

    Leave a comment:


  • Howard
    started a topic 1st & 2nd ball light tin cups

    1st & 2nd ball light tin cups

    All of the 1st and 2nd ball light plastic housings are either busted or melted. Some have a tin cup with a hole in the bottom glued on. The light bulb and the light assembly fit into the hole in the bottom of the cup. Does anyone know where these cups can be purchased from? Someone told me that they were the cups that were used in the older pop and ash tray racks that hooked on the back of the bowler seating up front. Thanks for reading.

Topic Starter RibbonScript

Collapse

Adsense Classic 2

Collapse
widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.
 

Approach Wear - DBA IQ/Anvilane

Our approach panels have a lot of wear at the joint between the first approach panel and the approach/heads panel. Nearly every one has the printed image worn through to various...
 

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...
 

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...
 

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...
 

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...
 

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...
Working...
X