No announcement yet.

Brunswick A electrical problem


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Brunswick A electrical problem

    I have two machines that have developed a problem, whenever either is turned on at the console (or in back) the other comes on as well.

    Anyone heard of this and any suggestions ?

  • #2
    Re: Brunswick A electrical problem

    You may have a "bank 8"short problem. Since 8 machines share a common going to the front deck, if one pinsetter gets a grond short it can affect any of the 8 lanes in that bank.(i.e. 1-8,9-16,17-24,etc.). Look for wires that could be pinched or rub into at the rake levers, ball dropsweep track, or shorted rest button upfront.

    If you want to see if it is a bank eight . Unplug your 3 pin cannon plug at the top of your pinsetter elecrical box and see if you can turn the machine on okay with the back switch.



    Topic Starter RibbonScript


    Adsense Classic 2

    widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

    Rake sweeping out of time, and pin launching onto lane.

    I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

    Strange sweep problem

    I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

    GSX Distributor shaft bearings

    Two part topic:
    1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

    2. ANY of these bearings with the black support mount...

    The Legacy of the A2

    I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

    Table turning on short stroke.

    Hello dear Bowltech members.
    First let me say thank you for your time. am plagued by a big issue for three weeks now.
    our technician is working full time on another...

    Another pivot bearing broke.

    One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...