No announcement yet.

Design Plus "Pro Striker " mini bowling with strings : tech help !


Adsense Classic 1

  • Filter
  • Time
  • Show
Clear All
new posts

  • Design Plus "Pro Striker " mini bowling with strings : tech help !

    image_12659.jpg I know is a long shot .....but I have to use also this option here . I have to repair a Design Plus "Pro Striker " mini bowling I manage to email to their sister company Designplusgranite and the reply was that Design Plus was shut down 5 years ago and there is no access to parts or technical support ....there was a lady responding to my email called Laurie , I' ve asked if she know any former technician which was working at Design Plus but no avail . So I wonder if one of You in this section have had to do with this Pro Striker and have some information .
    Machine do not start electronically display is dead ( compressor is working ) some leds are flashing on MPU but the main issue is that two hose of pneumatic are lose (pins 9 and 10 air hold )and the required electro valves are missing so this is one of the main issue to identify a source for the 2 electro valves missing picture 2

    the 2 electro valves missing WhatsApp Image 2021-04-01 at 12.11.22(1).jpegWhatsApp Image 2021-04-01 at 12.11.22.jpeg
    Attached Files

Topic Starter RibbonScript


Adsense Classic 2

widgetinstance 666 (Related Topics) skipped due to lack of content & hide_module_if_empty option.

Rake sweeping out of time, and pin launching onto lane.

I work on some nice old Brunswick A-2 pin setters. Most issues I've come across haven't been to problematic to figure out. But being I can't seem to get it to recreate the issue...

Strange sweep problem

I’m a rookie mechanic and have been working on pinsetters for 2 years. One of my lanes has a problem with a sweep possibly coasting. I don’t know what could be causing it...

GSX Distributor shaft bearings

Two part topic:
1. Plastic bearing (#66) used in place of regular sealed bearing (#51) -- thoughts?

2. ANY of these bearings with the black support mount...

The Legacy of the A2

I was recently disheartened to learn that a bowling center that I once serviced was actively looking to replace their A2's. I understand that most military bases and educational...

Table turning on short stroke.

Hello dear Bowltech members.
First let me say thank you for your time. am plagued by a big issue for three weeks now.
our technician is working full time on another...

Another pivot bearing broke.

One and a half year old GSX machines. This will be the 5th pivot bearing that has broke. This one decided to take out a few things with it. Snapped the stroke limiter shock stud...